Customization: Available
Cooling Method: Indirect Cooling
Certification: ISO, CCC
The exceptional thermal insulation properties of PUR/PUF foam minimize heat loss, reducing the need for energy-intensive cooling systems.
Product
High-density polyurethane foam or similar materials are used to minimize heat transfer and maintain the desired temperature inside the cold storage facility.
The panels are sealed with weather stripping and gaskets to prevent air leaks and further reduce heat loss.
Customization: Available
Cooling Method: Indirect Cooling
Certification: ISO, CCC
The exceptional thermal insulation properties of PUR/PUF foam minimize heat loss, reducing the need for energy-intensive cooling systems.
Product Details
Product Parameters
| Product Name | Description | Execution standards |
| Thickness (mm) | 250/200/180/150/120/100/75/50 | GB50072-2021 Design Specification for Cold Storage JB/T 6527-2006 Insulated sandwich panels for combined cold storage |
| Width specifications | 1120mm | |
| CORE | Polyisocyanurate (PIR) | |
| Raw material brand | Yantai Wanhua | Polyurethane raw materials |
| Density | Core material density 40 ± 2 kg/m ³ | GB/T6343-2009 |
| Thermal conductivity | Thermal conductivity ≤ 0.024W/m · k | GB/T3399-1982(1989) |
| Oxygen index% | ≥30 % | GB/T 2406.2-2009 |
| Dimensional stability | Dimensional stability<3% (70 ºC, 48h) | GB/T 8810-2005 |
| Bonding strength | ≥ 1.0kg/cm2 (0.1Mpa); The bonding area of the peeling surface is ≥ 90% | JB/T 6527-2006 |
| Flexural capacity | Simply supported sandwich panel, bearing a uniformly distributed load of 0.5KN/m2, with a relative L/250 at the mid span | JB/T 6527-2006 |
| Compressive strength | Compressive strength ≥ 0.15Mpa | GB/T 13840-2014 |
| Water absorption rate | Water absorption rate ≤ 4% | GB/T8810-2005 |
| Closed cell percentage | ≥95 % | GB/T10799-2008 |
| Combustibility | B1 level | GB 8624-2012 |
| Foaming technology | Pentane foaming |
The cold storage panels are consisted by an inner metal plate, an outer metal plate, and an intermediate polyurethane insulation layer.
Horizontal and Vertical Operation Methods:
1. Using waterproof film and SBS padding.
2. Galvanized L or U-shaped positioning (fixed with expansion bolts).
3. Sealant substrate.
4. Pre installed board seam sealant (double-sided groove sealant+polyurethane spray in the middle).
5. Vertical wall panel.
6. More than 6 meters require the installation of wall purlins, C-shaped steel, and quick mushroom nails.
Suspended ceiling panel operation method:
1. Determine the length and lifting direction of the ceiling panel based on the main beam of the building structure. (The joint of the ceiling panel is parallel to the main beam of the building)
2. Pre installed suspension beam structural components, 6 # channel steel and fixture suspension beam, suspended M12 lifting screw, connected to C-typeSteel keel.
3. Lift the insulation top plate.
4. Adjust the length of the lifting screw.
5. The main joint is sprayed with polyurethane foam, the PVC sleeve is foamed to break the cold bridge, and the color steel folding piece is trimmed.
 |  |  |
Quick Installation | Durable and long life use | Quick Mass Production As usual,2-5 days finished 1000 square meters panels. |
 |  |  |
Sound-absorbing | Fireproof | Waterproof |
Inquiry
Products Recommended
Room 106, Building 2, Capital Airport Center, Chengyang District, Qingdao
Copyright © 2024 Qingdao Bingyan Refrigeration Equipment Co., Ltd. All Rights Reserved. Powered by HiCheng.
